Here’s What You Can Do If iPhone Is Not Turning On!
One of the most annoying things one can face is having your iPhone in a complete shutdown mode. What does mean? Well, it simply means that there has been some issue and now the iPhone not turning on. It can also be a very frustrating thing if you’re in crucial need of it.
There could plenty of things that can be the reason behind this phenomenon. So if you’re in this situation, then you’ve come to the right place. Go through what’s written below on iPhone won’t turn on to get an idea of what’s happening and how you can turn on the iPhone successfully!
Determine Why the iPhone Is Not Turning On!
Before you begin to resolve the problem of the iPhone 6 won’t turn on, itis essential that you get a hold of what’s happening and why it is happening. Here’s a brief passage on why my iPhone won’t turn on:
1. Software Breakdown
Software breakdown is a common thing that happens all around the globe to iPhone devices once in a lifetime. If the software crashed then that may be the reason why the iPhone x not turning on
2. Hardware Breakdown
Now, this can be a bit complex. Hardware failure is worse than software failure because this implies that internal hardware components have crashed. Software failures can be resolved easily, while hardware failures need more nurturing to resolve.
So how to figure out which one is the reason being? Well, for that, go to the next section to find out.
Do These Methods If iPhone Won’t Turn On!
Go through the list of methods mentioned below to turn on the iPhone and get it started again if the iPhone x won’t turn on!
1. Restart The Device
It could be that the device has run out of charge. Often, the device takes longer to show the charging sign. Charge the device for a period of time. Then try restarting the device using the power button. Press and hold it until you see the slider button on the screen. If it did not work, try the next method.
2. Hard Reset The Device
Hard resetting the device is not the same as restarting the device. It rather clears the memory of the device without making any loss of your personal data.
Press the up button fo the volume key and hold it. Then do the same with the down button. Now finally do the same with the side key on the device. Make sure you’ve held the buttons for more than 10 seconds. Now you’ll see the icon of Apple along with the slider on the screen, release the buttons as soon as you see it.
3. Check Lighting Cable
If you are unable to turn on the iPhone device then be wary that the problem may be with the Lightning cable. Try charging the iPhone device using a different cable or a different adapter. If it works, you see signs of charging then you know the problem was with the cable.
Simultaneously, try charging another device using the previous cable to know for sure if the problem is with the cable or the device. If it works, then you’d have to try other methods.
4. Reset iPhone Using Factory Settings
Before you try this method, here’s a friendly warning that this method will get rid fo whatever is on the phone and that includes all your personal data. It will start the device afresh. So if you have not backed up your personal data somewhere else, skip this method.
Open any operating system and connect it to the iPhone device using the lightning device. If the device is not opening, then use the volume down and the side button to press and hold it. Once you’re in recovery mode, select the option called “iTunes”. Then choose the option called “Restore iPhone”.
Now you’ll be prompted to confirm whether you’d like to back up your personal data or not. Confirm it and then click on the option called “Restore”.
5. Do Device Firmware Update (DFU Mode)
If you’ve done jailbreaking to the device then you’d see that the screen is stuck on startup and won’t be on. In that case, it is advisable that you ut the iPhone device into the DFU mode using the following way:
Before you begin, ensure that the iTunes application is running after you’ve shut the device off.
Now connect the device to the PC. Then, press and hold the power button for more than 3 seconds. Along with that, hold the side button of the device for more than 9 seconds. Now, let go of the power key while keeping the down volume key on hold.
Now the device should enter into the DFU Mode. However, if not, then try something else mentioned below.
6. Look Out For Physical/Liquid Damage
Iphon devices are delicate in nature. Any minor damage can lead to a bigger problem. Check the device has dealt with any kind of physical damage. If the iPhone device won’t turn on rights after any kind of damage then it could be the major reason behind the problem.
Similarly, if the device has dealt with liquid damage, then iPhone won’t turn on and we’re talking about a drop of water getting exposed to the charging port of the device.
If its either of the case, then your best bet would be to contact the Apple support team if you have a warranty. If the device is new, you might be able to get a replacement.
7. Verify If Its the Screen Is Dark Due To Proximity Sensor
Here’s one more thing that can be deceiving you. Maybe the device is working fine but the screen is set to dark that you cannot see anything. This happens due to a function called “Proximity Sensors”. To resolve this do the following steps:
The first thing, to begin with, is by resetting the iPhone device is the process that is mentioned before. You’ll see that the device will restart. Then go to the option called “Settings”. From there, go to the option called “General”. After that, click on the option called “Reset”.
Now tap on the option called “Reset All Settings”. So if the proximity sensor was high, the settings of it will now be set to default.
8. Contact Apple Support Team
If none of the aforementioned methods helped you in turning on the iPhone device, then your last resort is to get in touch with the Apple Support Team. Simply contact the Apple support team through email or their official website. Briefly describe the details of the problem and let them help the issue.